Study of the Milkability of the Mediterranean Italian Buffalo and the Tunisian Maghrebi Camel According to Parity and Lactation Stage.

While considered as hard milkers, both buffaloes and camels are milked with equipment destined for dairy cows based on external morphological similarities with this species. This work aimed to study similarities and differences in milkability traits between Mediterranean buffaloes and Maghrebi she-camels and to evaluate the effect of parity and lactation stage. A total of 422 milk flow curves recorded with an electronic milkmeter (Lactocorder®) for both species were accessed. Milking characteristics including milk yield per milking, peak milk flow, average milk flow, duration of the main milking phase, duration of total milking, duration of various phases of milk flow, lag time and time to milk ejection, stripping yield, overmilking time and incidence of bimodal milk flow curves were evaluated for both species. Results showed that the values of milk yield per milking, duration of the main milking phase and duration of total milking were higher in buffaloes (3.98 ± 0.10 kg; 4.07 ± 0.11 min; 9.89 ± 0.21 min, respectively) compared to camels (3.51 ± 0.08 kg; 3.05 ± 0.09 min; 3.76 ± 0.09 min, respectively). However, camels had significantly higher peak and average milk flow (2.45 ± 0.07 kg/min and 1.16 ± 0.03 kg/min, respectively). Camels took significantly less time for milk ejection to occur. Only 15.49% of recorded curves were bimodal in buffaloes while 34.93% of bimodal curves were recorded for camels. Overmilking was significantly higher in buffaloes (3.64 ± 0.21 min vs. 0.29 ± 0.02 min). Parity and lactation stage had a significant effect on most studied milking traits suggesting the need for some particular practices with primiparous animals and animals at different levels of lactation for both species.

Machine Milkability of Dromedary Camels: Correlation between Udder Morphology and Milk Flow Traits.

This study aims to measure mammary morphological traits with a functional influence on machine milking ability of Tunisian Camels (Camelus dromedarius) and their evolution according to the stage of lactation and parity. Udder and teat measurements were recorded before morning milking and associated with the measurement of milk emission kinetics parameters evaluated with Lactocorder® devices (WMB AG, Balgache, Switzerland) and observations. Three main teat shapes were recorded and their dimensions evolved with parity and stage of lactation. The milk flow curves were classified into three main types according to their maximum and average flow rates and they also evolve according to parity and stage of lactation. An average of 41% of the milk flow curves was bimodal. The correlations showed that some morphological traits were unfavorable to rapid milking and that these increase with parity. Therefore, this study provides the first elements for a morphological selection associated with an aptitude for mechanical milking which appears rather good in our dromedaries. Nevertheless, it will be necessary to monitor a possible negative evolution of the functional and anatomical traits of the udders during the career of the animals.

Oxytocin and cortisol release during suckling, hand-milking and machine milking in camels.

This research paper addresses the hypothesis that oxytocin (OT) could be released during suckling and during milking with and without the presence of a calf and that this release could be regulated by maternal behaviour. Plasma concentration patterns of OT and cortisol (CORT) were measured in six Tunisian dromedary camels during 2 suckling episodes, 2 manual milking episodes with calves beside the mother and 2 machine milking episodes without calves present. Various patterns of OT release were observed between each camel including specific two peak release patterns. Higher plasma OT concentrations were found during the suckling and hand-milking episodes with simultaneous suckling of calves, than during the machine milking episodes without calves. Exclusive mechanical milking episodes also evoked significant mean OT release, although greatly reduced compared to suckling and hand milking. The low basal levels and classical CORT release patterns suggested non-stressful management practices were used and there were very limited differences in udder stimulation between managements. The OT release induced by exclusive suckling and suckling together with hand-milking gives a reference point for what a good milk ejection stimulation is in camels. The important and specific reduction of OT release during machine milking without the calf present could be a physiological consequence of the maternal behaviour (selectivity for the own young) and to a lesser extent explained by a lower stimulation by machine milking.

Factors affecting the milk yield and composition over lactation of prolific D'man ewes in Tunisian oases.

This work aimed to investigate milk potentiality and the influence of some non-genetic factors both on milk yield production and composition in prolific D'man sheep. Observations were performed in eighty lactating D'man ewes maintained under an intensive oases system in Southern Tunisia. Daily milk yield was determined at 7-day intervals using oxytocin + hand milking method. Chemical milk composition was determined by Lactoscan. Total productions over lactation (milk, fat, and protein) were estimated using the Fleischmann method. Daily milk yield averaged 1.64 ± 0.02 l. It increased to a plateau from the third to the fourth week of lactation, and decreased gradually to the tenth week. D'man ewes produced 128.91 ± 3.14 l of milk, 9.23 ± 0.26 kg of fat, and 5.26 ± 0.12 kg of total proteins. Overall, milk contained 16.17% of total solids, 7.08% of fat, 4.04% of proteins, 4.32% of lactose, 9.09% of solids-not-fat, and 0.73% of ash. Lambing season affected the daily milk yield and milk composition, where fat and total proteins were highest in autumn. Total solids, lactose, solids-not-fat, and ash were higher in winter than in autumn and summer. Ewes reared multiple lambs produced more milk than those reared singles. Dams nursing triplets or more had the highest milk total proteins, and the lowest total solids and fat levels. Adult ewes produced more milk compared to younger and older ewes, and their milk contained higher total solids, fat, and ash levels than milk from young ewes. Ewes with asymmetric udder produced less and more concentrated milk than ewes with symmetrical udder. Daily milk yield was negatively correlated to total solids, fat, and total proteins amounts. In contrast, litter survival at weaning was positively correlated to the amounts of total milk, fat, and total proteins.

Relationship between external and internal udder and teat measurements of machine milked dromedary camels.

This study aims to determine the relationship between internal and external udder and teat measurements and evaluate their correlation with milk yield and milk partitioning in the udder of dromedary camels. Six Maghrebi camels reared under intensive conditions were monitored at early, middle, and late lactation. Udder measurements included udder depth, udder horizontal circumference, fore and rear teat length and diameter. Besides, scans of the left fore and rear quarters were taken in duplicate before morning milking (16 h) using an oxytocin receptor blocking agent (Atosiban) to determine teat and gland distension before milk ejection. Cisternal and alveolar milk volumes were then evaluated. Correlation coefficients were calculated between the performed udder external and ultrasonographical measurements and cisternal and daily milk production on the measurement day. Significant effect of lactation stage was observed in all measured traits. All internal and external measurements decreased significantly at late lactation as well as cisternal and total milk yield. The quarter cisternal area averaged 16.3 ± 2.2 cm(2) and decreased about three times at late lactation compared to early and middle lactation. All external and internal measurements were positively and highly correlated (P < 0.001). The knowledge of the relationship between udder internal and external morphological traits would permit to predict udder cisternal storage capacity and can ultimately be adopted to improve milk storage capacity of dromedary camels.

Developing mechanical milking in camels? Some main steps to take .

After a first phase of development in the ex-Soviet Union in the 1940s, camel mechanical milking is now developing again in the Arabic peninsula, North and East Africa, Asia, Australia and even in the USA and Europe in a lesser extent, because of the great demand and important health value of camel milk. Nevertheless, such a development remains empirical and uses trial and error methodology, which is generally more time-consuming and more expensive and could create a deadlock in the situation. Nevertheless, developing mechanical milking of camels could be done throughout a step by step well-designed approach rather than this empirical approach. It is the only way to understand the animal/machine interaction and to give us the means to adapt machine milking to the different situations encountered in the world and to animal specificities.After describing the different essential and ancillary steps of this development (knowledge of animal physiology, udder and teat shapes, teat functional characteristics, first functional data of milking including teat reaction, milk emission kinetic, efficiency of milk extraction, weaning procedure, milking procedure, milking behavior of animals, adaptation of material and settings…), we aim to relate, as example, the first results obtained in Tunisian dromedary camels in the last 4 years as basis for more adapted or even specific materials and setting evolution.

Effects of vacuum level and pulsation rate on milk ejection and milk flow traits in Tunisian dairy camels (Camelus dromedarius).

This work aims to compare the effects of milking at two vacuum levels (38 and 48 kPa) and three pulsation rates (60, 90, and 120 cpm) on milk production and milk flow characteristics. Six multiparous Maghrebi camels in late lactation and once daily milked were used. The best combination of setting for camel's milking was high vacuum and low pulsation rate (48 kPa/60 cpm). Milk yield and average and peak milk flow rate were the highest, while milking time was the shortest using this combination of setting (3.05 ± 0.30 kg, 1.52 ± 0.21 kg/min, 2.52 ± 0.21 kg/min, and 3.32 ± 0.31 min, respectively). Lower vacuum level lengthened milking time by more than 100 % and was not sufficient to extract milk correctly (1.69 to 2.48 times less milk yield harvested), suggesting a negative interaction with the stimulatory effect of pulsation. Higher pulsation rates did not better stimulate the camels and induced more bimodality and lower milk flow rates. Animal characteristics and liner/claw design affect machine milking and further investigations must be carried out to verify their effects and to study long-term effect of high vacuum level on udder health and teat condition.

Effect of changes in milking routine on milking related behaviour and milk removal in Tunisian dairy dromedary camels.

We studied the effects of changes in the milking routine (lack or presence of 30-s prestimulation, 0 or 1, 2 or 4-min delay between preparation and cluster attachment) and environmental perturbation (unusual loud sounds capable of frightening animals just after stall entry or during the course of milking) on milk removal and milking-related behaviour in dairy dromedary camels. A 30-s prestimulation decreased incidence of bimodal milk flow curves and increased occurrence of the best milk ejection patterns with higher milk flow but had limited effect on milk production in our well-trained animals within a good machine milking setting. However, unusual sounds heard from the beginning of milking or even after milk ejection caused inhibition or disruption of milk removal and modification of camels' behaviour. Milk ejection was significantly delayed (1·58±0·17 min), residual milk increased over 40% of total milk yield and average and peak milk flow rates were significantly lowered when unusual noises were heard from the beginning of milking. These environmental perturbations increased signs of vigilance and the number of attempts to escape the milking parlour. Delaying cluster attachment for over 1 min after the end of udder preparation caused serious milk losses. Up to 62% of total milk was withheld in the udder when the delay reached 4 min. Average and peak milk flow rates also decreased significantly with delayed milking. Signs of vigilance and attempts to escape from the milking parlour appeared when camels waited for over 2 min. After a 4-min delay, camels showed signs of acute stress. Defaecation prior to milk ejection (solid faeces) and rumination during milking can be used to assess camels' milk ejection during milking. Animal welfare and milking efficiency can be ensured when camels are pre-stimulated, milked in calm conditions and with cluster attachment within a maximum of a 1-min delay after stimulation.

First description of milk flow traits in Tunisian dairy dromedary camels under an intensive farming system.

In order to evaluate milking ability in dromedary camels, 124 milk flow curves were registered during morning milking of 20 dairy Maghrebi dromedary camels. Animals were in lactations 1-8, were 6-19 years old and were 4-15 months of their current lactation. Milk flow curves were recorded using an electronic milk flow meter (Lactocorder®). Milk flow curves were classified in three typical patterns: type 1 represents curves with one high and short peak of milk flow; type 2 represents curves with a moderate mean milk flow rate during a large plateau phase; and type 3 represents curves with lower mean milk flow rate and a relatively longer milking duration. The ratio of the different milk flow patterns in the population evaluated was 40:38:22% for types 1, 2 and 3, respectively. The highest milk yield per milking, average and peak milk flow were observed in camels with type 1 curves (4·24 kg, 1·49 and 3·54 kg/min, respectively) followed by type 2 animals (3·30 kg, 1·12 and 2·12 kg/min, respectively) and lastly type 3 curves (2·34 kg, 0·65 and 1·23 kg/min, respectively). This study confirmed that a major proportion of dromedary camels have a suitable machine milking ability. Nevertheless, our results suggest that pre-stimulation and improving the milking process may improve milking efficiency and guarantee a more complete and rapid emptying of the udder.